ICS Company Logo. Industrial Contractors Supplies
DUST CONTROL SYSTEMS
EQUIPMENT      TOOLING      KNOWLEDGE

Dust Director Logo.

20 Diamond Deal   Home of the 20 Diamond Deal   20 Diamond Deal

Call the Dust Director. 1-412-824-6933

Concrete & Masonry - Silica Dust & Slurry Control - Products & Solutions.

 

HOME

Product Brochures

Company Literature

Manuals

 

DUST CONTROL

Dust Guards, Saws

Blowers, Dust Socks

Grinders, Respirators, etc.

 

VACUUMS
&
CYCLONES

Silica Dust Extraction
Wet/Dry Models
Slurry & Sludge Extraction

ACCESSORIES
Replacement Filters, Hoses, Cuffs, Separators, etc.

 

SLURRY DeWATERING

Slurry, Sludge, Flood Reclamation - Relocation, Filtration, Disposal.

Slurry Press Machines

--  Polymers  --
Super Absorbent
SOLIDIFICATION

 

DIAMONDS
Blades, Cup Wheels
Surface Cleaning + Polishing
Coatings & Joint Sealant Removal

 

Clearance
Section

 

SEALANT REMOVAL
 Slice or Scrape
but don't grind ~

Joint Sealant
Coatings Removal
"Without Melting"

Carbide Drill Bits, Chisels, Scrapers Makita Power Tools
Drilling, Demolition, Saws, Dustless Drilling Attachments

Floor Machines --- Dust & Slurry Control
Why Use Larger & Heavier Machines?  Get Off Your Knees! 
Multi-Use Compact Portable Heavy-Duty

Abrasives & Wire Wheels

 

Vacuums  >  Model DD1000 Dust Director 1-Motor Vacuum.
 

Dust Director® 1-Motor Vacuum

Easily 10% Greater Suction than Bosch, Dewalt, Fein, Makita & Metabo Vacuums.

Dust Director DD1000
10 Gallon Dust Extractor

Purchase your selection(s) and click the Buy Now buttons to add or save your item(s) to the Shopping Cart.  Once added, you can add, edit or delete any items or change the quantities.

 

$390.00    

Lightweight, Compact, 10 Gallon Industrial 1000 Watt 2-Stage Motor with AIRFlow HEPA Filtration --- 20% Greater Suction and any other Vacuum Cleaner.

Specifically designed for the dustless tuck pointing profession - extracts 30 lbs. of ultra fine silica dust without suction drop - concrete dust will literally accumulate in the collection tank, to its inlet port, without suction drop.

Provides all the power and filtration you need to capture silica powder from hand held dust extraction tools - including our 12" Dust Director Cut-Off Saw.  A light weight vacuum but with an industrial grade motor and the same filter system found in our more expensive models.

Filter System -- AIRFlow HEPA Filtration.  Expect to collect over 30 lbs. of concrete dust with little if any suction drop.  Turn the vacuum off then on again and the filter bag will release any caking by deflating and re-inflating itself.  Turn on the vacuum and suction power actually improves!  The 10 gallon collection tank will fill completely, to its inlet port with maybe a minimal drop in suction power.

Filter includes:  HEPA Cartridge Filter, Clean Extreme Filter Collection Bags (3).  Any type of debris, from dry concrete powder to moist or oily debris to hot mastics --- everything is collected and contained within the Clean Extreme Filter Bag WITH minimal suction loss AND with everything completely contained within the Clean Extreme Filter Bag.  HD Clean Extreme Filter Bag removed from tank - holds 140lbs. of dry concrete dust - inside of the tank remains clean. ADDITIONAL BENEFITS INCLUDE:

  • Clean Extreme Filter Bag completely fills - to the inlet port on the tank ~ Providing long operating times without suction drop
  • The outside of the filter bag stays clean
  • The inside of the tank stays clean
  • The HEPA Cartridge Filter stays clean (expect to replace it in two or three years)
  • Removal, handling & disposal of the completely contained debris is clean, easy and without a mess.

DD1000 - Equipped as follows:  10 gal. poly collection tank, 110 Volt 2-Stage 1000 Watt 8.5 Amp Motor, 130 CFM, 78" H20, 2" Inlet Port, 1-1/2" x 12' Hose, 2" ID Smooth Vinyl Hose Cuff, AIRFlow HEPA Filtration, (3) Clean Extreme Filter Bags, Trolley Car.  Silica Dust Capacity:  30 lbs.  Increases to 40 lbs. when a Power Station is used.  Size:  12" x 29", 15 lbs., Sound Level:  80dB.  Lighted on/off Motor Switches.  HD, industrial, water resistant - Completely weatherproofed "on/off" switches.

 

 

Available Accessories

Assorted Vacuum Hoses.HOSES - Lightweight and flexible.  Hoses are complete with an inlet hose cuff and 2" ID smooth soft vinyl hose cuff (to slide over the barrel of a dust control guard).

12' x 1-1/2" Hose
$ 70.00    
(Included with DD1000)

12' x 2" Hose
$ 70.00    

25' x 2" Hose
$140.00    

 


CLEAN EXTREME FILTER COLLECTION BAGS   #HL500-25 (3 included with DD1000)

Small Filter Bag, 2-1/2" Inlet Port, Collects Powders, Creosote, Mastics, Sharp Objects, etc. -- No Filter Blinding or Bursting!

2/Pk, $13.85/bag
($27.70)

20/Bx, $11.55/bag
($231.00)

50/Case, $10.00/bag
($500.00)

Free Shipping on (1) Case of Filter Bags.

 

 

Flutter Filter Basket - Constantly shakes, beats & flutters, prevents filter blinding without electronic pulsing.

12" Flutter Filter, #FF-300:  $120.00  

 

 

 

 

 

MODEL DESCRIPTION

The DD1000 is with incredible suction power in a compact 1-Motor 10 Gallon Dust Extractor - specifically designed for use with dustless handheld angle grinders.

With its powerful industrial motor the DD1000 provides far greater suction power for not only CFM performance but also in its ability to vacuum heavier weighted debris such as stone, metal and water.  With 1000 watts of power, the motor's power is further enhanced by the heavy gauge polyethylene tank and its structural ribbing.

Applications:  Masonry & Concrete Grinding, Tuck Pointing, Manufacturing, Industry, Chimney Sweep Cleaning, Hardwood Floor Sanding, General Purpose Commercial & Residential & Industrial Use.

Powerful, Durable ~ Designed for Heavy-Duty Continuous Use  

Dual fan cooling motor prevents the motor from overheating and extend the motor's life.  The DD1000 allows wet/dry recovery without the need to change filters and leaves competitive units in the dust when comparing suction power and performance during powder extraction applications.

With its small, compact size and "low voltage" requirements, with AIRFlow HEPA Filtration the DD1000 provides non-stop or non-blinding suction performance.

Shipped as an approved Dust Extraction for OSHA's Silica Dust Exposure Law, the DD1000's HEPA rated filter is complete washable.

When combined with ICS's Dust Director® dust control guards, the DD1000 is an integral component of having a complete dust control package for today's stringent silica dust exposure laws.

Powerful, compact and portable, the DD1000 is well equipped as follows:

  • 2" x 12' crushproof but flexible hose

  • 2" ID smooth soft vinyl hose cuff

  • Washable HEPA efficiency cartridge filter

  • Three (3) Clean Extreme Filter Collection Bags.  Debris of all types, from silica dust to sludge and sharp objects, are completely contained within the breathable filter bag and without the problem associated when using a paper filter bag:  bursting inside the tank during the vacuum's operation.

While designed as an approved silica dust extractor, this compact and light powerhouse is perfect for heavy-duty construction and work shop use and as well for the house.

The Dust Director's unique HEPA rated cartridge filter permits simultaneous dry and wet recovery without the hassle of changing filters during a clean-up project.  The filter is easily removed from its filter cage for washing and re-use.

Uncompromising Power - Our unique but very simple AIRFlow HEPA Filter System guarantees constant high suction power at all times, longer periods of uninterrupted operation, lower maintenance costs and a longer service life. 

 

Are You In Compliance?

 
DOL US imageUNITED STATES
DEPARTMENT OF LABOR

OSHA's Silica Dust RuleThe Dust Director® has been used and has figured prominently in just about every silica dust control study since its inception in 2001.

This includes the Dust Director's acknowledgement in OSHA's Final Rule:  Requirement of dust control to keep workers from breathing silica dust - Effective 23 June 2016.

 

Final Rule - Required CFM Ratings
Is your vacuum in compliance?  Does it have enough CFM?

 *  To comply with OSHA's Standard one of your first steps is to select a vacuum or cyclone that has enough CFM to handle your wheel's diameter.  Use the chart and information below to help you select the model that has enough CFM.

Wheel Diameter * Required CFM Dust Director® Models - CFM Rating
** Vacuum Model
- CFM Rating
** Cyclone Model
- CFM Rating
4.5" 112.5 DD1000 - 130

DD1200 - 140

CP1200 - 160

DD2000 - 260

DD2000S - 260

DD2400 - 318

DD3900 - 447

C2000S - 270

C2400SD - 315

C2400M - 315

C2400B - 315

C3900B - 340

5" 125
6" 150
7" 175
12" 300
14" 350
16" 400
 *  OSHA's Required CFM Rating:  25 CFM or greater per inch of wheel diameter.

 

 

OSHA's Silica Dust Exposure Law.  Additional vacuum cleaner information & requirements.  OSHA's Final Rule Is NOW the Law.  Are you in compliance?Ridgid Vacuum.

Comparison.  Are you using a common wet/dry shop vac for dust control?

 

 

 

 

AIRFLOW HEPA FILTER SYSTEM - Background, Filter Information

AIRFlow HEPA Filtration - the Ultimate Filter System?  The AIRFlow HEPA Filter System includes a HEPA Efficiency Pleated Cartridge Filter and your choice to use the Clean Extreme Filter Collection Bags or the Self-Cleaning Flutter Filter:

 

Dust Release & Water Shredding HEPA Cartridge Filter, included with each Dust Director Vacuum & Cyclone.DUST DIRECTOR's CLEAN EXTREME HEPA CARTRIDGE FILTER.  Product Made in the USA.

Utilizing state of the art manufacturing and in house testing, the filter has been specifically designed to provide the performance required for the proper operation of a Dust Director® Vacuum.

Wet & Dry Use + HEPA Rated + Longer Life with Applied PTFE Membrane:  The Non-stick Dust Release & Water Shredding PTFE Membrane enhances the filter's capabilities in several areas, including filtration efficiency (meets or exceeds a HEPA rating), cake release, cake prevention, "extreme" service life.

A filter's base fabric is typically made of woven or felted synthetic fibers, natural fibers or fiberglass.  The membrane is a mechanically applied surface treatment (extremely thin, from 0.4 to 10.0 mils) that requires the filter's fabric for support.

Benefits of the Expanded PTFE in Dust Collection Applications:

Increases Filtration Efficiency to help meet EPA-mandated limits on exhaust emissions while providing the following benefits:

1)  Provides surface filtration rather than depth filtration (which is provided by conventional filter fabric).  Surface filtration keeps the captured dust particles away from becoming impregnated into the base fabric, thus reducing fabric abrasion and extending the filter's service life.  With longer service life you won't need to change the filter nearly as often which reduces your replacement cost and downtime during operations.

2)  Reduce pressure drop, cut energy (motor) costs.  The membrane typically prevents pressure drop across the filter by about 10 percent.   This in turn cuts wear on the vacuum's motor(s) while reducing power consumption by as much as 33 percent!

3)  Extreme Dust Cake Release / Extreme Dust Cake Prevention.  The expanded PTFE membrane is slicker than a conventional filter fabric and it easily releases any dust cake during cleaning.

4)  Most people purchase a vacuum cleaner based on improvements or features of the vacuum cleaner.  The vacuum's cartridge filter alone, applied with a PTFE membrane, will increase the vacuum's performance by as much as 25 percent - thereby increasing production rates for your entire operational process.

5)  Extreme & Diverse Applications.  The expanded PTFE membrane can withstand the most abusive of applications, dry or wet, and temperatures up to 600°F --- highly suitable for high-temperature applications such as when removing hot mastics.  Additionally, as stated, the filter is complete washable.

6)  While the PTFE membrane increases the filter's and vacuum's cost, the initial cost is offset by improved filtration efficiency, vacuum performance and longer filter life.

 

Clean/Extreme Filter Collection Bag.  HD, cloth filter bag installs into any W/D vacuum, maintains suction performance, collect dry, wet, sharp debris.CLEAN EXTREME FILTER COLLECTION BAGS (3 included per vacuum):

With a Clean Extreme Filter Bag installed you can expect to collect large volumes of silica dust - to the tank's inlet port - without incurring suction drop or without the filter bag tearing or accidentally bursting inside the tank.

Improve Productivity.  How many times are you stopping to clean or maintain the vacuum's filter or having to empty the tank all too often?  With a Clean Extreme Filter Bag installed, suction power stops when dust begins to exit through the tank's 2" inlet port --- fine powders collected and contained within the Clean Extreme Filter Bag will not cause blinding (i.e. the powder will not cake the bag's lining, suction is not diminished.)

When vacuuming any type of power, for hours at a time and you happen to notice suction drop . . . With a Dust Director Vacuum you simply turn off the vacuum, doing so will cause the Clean Extreme Filter Bag to deflate;  when you turn the vacuum on the bag inflates and suction resumes 100% ~ Guaranteed.

Are you grinding dry and you come across wet concrete, stone or mortar?  No problem - Clean Extreme Filter Bags work even better when the surface is damp!

Besides maintaining suction and collecting large volumes of powder without suction drop, Clean Extreme Filter Bags also collect:  Moist debris, sharp objects and hot mastics ALL AT THE SAME TIME.  Additionally, when you remove the filter bag you'll notice that the inside that the inside of the tank, the outside of the bag and the HEPA cartridge filter are "clean":

Clean Extreme Filter Bags:  Collects anything - powders to sludge - they fill to capacity, powders do not blind suction, no accidental bursting or tearing inside the tank or while being handled during disposal, and everything stays clean ~ Guaranteed.

Extreme Filter Bags install into wet/dry vacuums with an inlet port - Tanks stay clean, cartridge filters stay clean - even after collecting 140 lbs. of dry concrete dust.

HEPA Cartridge Filter Stays Clean

Clean/Extreme Filter Bag:  Large collection yields, everything stays clean including cartridge filter, tank & the outside of the bag.

Tanks Fill To Capacity without Suction Drop
Inside of the tank is kept clean.

Clean / Extreme Filter Bag removed from tank - holds 140lbs. of dry concrete dust - inside of the tank remains clean.

Outside of the Bag Stays Clean
- Filter Bag Will Not Tear -
Handling & Disposal is Easy
Clean & Without a Mess

 

FLUTTER FILTER - Optional Filter.

Flutter Filter Basket - Constantly shakes, beats & flutters, prevents filter blinding without electronic pulsing.The Flutter Filter is a self-cleaning drop-in filter that may be used instead of the Clean Extreme Filter Collection Bag.  As soon as the vacuum is turned on the tightly weaved "but loose fitting" Flutter Filter beings to flutter and shake, using the air speed and turbulence inside the collection tank to create its motion.

Constantly and naturally in motion, dry debris and roughly 50% of the powders are kept from blinding the surface of the Flutter Filter and causing suction drop.  

Like a Clean Extreme Filter Collection Bag, any accumulation or blinding on the surface of the Flutter Filter is naturally released when the vacuum is turned off and on:  When the vacuum is on the Flutter Filter raises, when the vacuum is turned on the filter drops . . . effectively releasing any caking.

DD1000 Watt - Shown with Flutter Filter installed.Additionally, to help prevent blinding while the vacuum is on, a floating filter cage inside the Flutter Filter swings freely and loosely as it shakes and knocks itself about using the air speed and turbulence inside the collection tank

When you're on a job site it's nice to have options . . . with a Dust Director® Industrial Vacuum Cleaner you're able to use either the Clean Extreme Filter Bags or the Flutter Filter.

Clean/Extreme Filter Collection Bag.  HD, cloth filter bag installs into any W/D vacuum, maintains suction performance, collect dry, wet, sharp debris.The Clean Extreme Filter Bags are the absolute best filter system on the market for collecting "large volumes" of silica dust while maintaining maximum suction performance and for keeping everything clean inside the tank and even during removing and handling ~ everything is kept clean and there isn't a mess.

But the Flutter Filter works impressively as well, reduces or eliminates the cost of replacement filter bags, uses no electronics to shake or pulse itself clean and it is completely re-useable and washable.

Flutter Filter - Specifications, Additional Features:

  • High Efficiency Filter Media, 96.5 @ 0.3 microns

  • Dry powders do not impregnate the material like commonly used "felt" filters

  • Keeps the vacuum's HEPA Cartridge Filter from caking.  While it may become dusty it will not cake.

  • Durable - Completely Washable

  • Versatile - Collects dry or wet debris without compromising its effectiveness.

 

 

Still Using a Standard Wet / Dry Vacuum as a Dust Extractor?

 

Shop Vac - 16 Gallon Tank with 2-1/2" x 6' Hose.

Shop Vac - $94.97

Ridgid Vacuum - with 2-1/2" x 6' Hose.

Ridgid - $99.00

Shop Vac - with 2-1/2" x 6' Hose.

Shop Vac - $116.97

 

Compare & Consider . . . Shop Vac and Rigid Vacuums have their place.  We all have one.
With OSHA's Final Rule:  You Will Get Fined Using a Non-Compliance Dust Extractor.

 

KNOW THE RULE:

OSHA's Silica Dust RuleOSHA's Final Rule to Protect Workers from Exposure to Respirable Crystalline Silica

Rule requires engineering controls (tools and equipment) to keep workers from breathing silica dust.

What is Respirable Silica Dust?  These tiny particles (known as "respirable" particles) can penetrate deep into workers' lungs and cause silicosis, an incurable and sometimes fatal lung disease.  Crystalline silica exposure puts workers at risk for developing lung cancer and other possible debilitating respiratory diseases such as chronic obstructive pulmonary and kidney disease.

How Much Respirable Silica Dust is Safe to Breath?  OSHA has issued their Final Rule to curb these respirable and kidney diseases in America's work force by limiting a worker's exposure to respirable crystalline silica to 50 micrograms per cubic over an 8-hour shift.

Packet of sugar - example of 53 micrograms.What Does 50 Micrograms of Respirable Silica Dust Look Like?  A good example may be one of those small paper packets of sugar or artificial sweeteners found in restaurants.

When used to demonstrate the dust concentration inside a building, the size of a football field (100 yards x 53 yards x 14' high).  The weight of one of those little packets is 53 micrograms, which is slightly over the PEL (permissible exposure limit) for Silica Dust of 50 micrograms.

Such a fine dispersing of dust at this concentration would essentially be invisibility.  It is also enough to put the workers at risk by contaminating the work area --- the size of a football field x 14' high.         

 

OSHA_Photo_1.jpg (848150 bytes)OSHA's Respirable Silica Dust Law - Effective:  23 June 2016.  Since 1999, the Dust Director® has been involved with various organizations aimed at improving the health and safety on construction sites.  On a meeting, dated 23 April 2014, the Dust Director® was invited to participate in a discussion about OSHA's upcoming Silia Dust Standard.  Besides the representatives from OSHA, the following organizations were also present:

  • NIOSH

  • CPWR (Center for Construction Research and Training)

  • Various university research scientists and professors

  • Health and environmentalist

  • Mike Kassman, National Safety Coordinator for the International Masonry Institute (IMI)

  • Jerry Scarano, Vice President of the International Union of Bricklayers and Allied Craft Workers (BAC).

In past meetings, by the use of various air testing meters, NIOSH determined that the Permissible Exposure Limit (PEL) of a worker being exposed to silica dust should not be greater than 93.4.  [On record, NIOSH tested the Dust Director® System (dust control guard and vacuum), and determined the complete system "provided the greatest reduction of capturing silica dust at 94% than any other vacuum and dust guard that was tested.]

Currently, to simplify the understanding and importance of containing silica dust exposure, OSHA and all parties involved, have adopted the buzz phase of "visible dust," as their measurement of whether silica exposure is being sufficiently contained for both the workers and public.

 

OSHA_Photo_6.jpg (988907 bytes)CASE STUDY:  Dust Left to Fly from a Skyscraper ~ An interesting case study was provided by a Detroit contractor who was tuck pointing at a high rise office building in downtown Detroit, 35 floors above the sidewalks.  A summarization of his findings on silica dust exposure is as follows:

  • Two workers were tuck pointing an office building, 35 floors up, without the use of dust control

  • The thinking was, to leave the silica fly and let it disburse into the sky . . . that it wouldn't harm anyone or anything

  • As the safety coordinator for the company, he monitored the air quality of his workers

  • His air quality readings were as follows:
    >  Employee "A" was working in air quality that measured 85 times over the NIOSH established PEL
    >  Employee "B", working downstream from employee "A", was receiving a concentrated dose of dust as his air quality measured 135 times over the PEL!

While this case study shows how "visible dust" may be seen, more importantly was the moral obligation we need to take for our construction workers, the public, and the environment.

 

Dust Emissions --- Does Your Vacuum Leak Dust?

Dust linkage, from a standard type wet/dry vacuum. Dust linkage (rear view) from a standard type wet/dry vacuum.

Check your vacuum!  With OSHA'S "No Visible Dust Law", is there a gasket beneath the motor head to seal the tank?

With the OSHA ruling You will get fined using a vacuum that leaks.

  • With a Dust Director® Vacuum, Like-New Suction is Every Time -
    Unlike other vacuum cleaners where the same cartridge filter is used again and again and again . . .

  • With a Dust Directo® Vacuum, the HEPA cartridge filter stays clean.
    While it may get dusted, it will never become caked
    ~ Guaranteed.

 

Poured in place urethane gasket, beneath the head of a Dust Director Vacuum.Urethane Motor Head Gasket.  Beneath the motor head of every Dust Director® Vacuum & Cyclone is a poured-in-place urethane gasket that is used to ensure a positive airtight seal between the motor head and its tank.  Commonly used shop vacuums and even higher priced vacuums will use foam or nothing at all.

The urethane gasket ensures against dust leakage into your work area and prevents even the slightest loss of vacuum which would naturally reduce suction power.  Many wonder how the suction of a Dust Director® Vacuum and Cyclone seems so much more powerful than other brands, one of the reasons is the urethane gasket.

Dust Director's Increase in Suction Power?  While a complete Dust Director System (vacuum and dust guard) have been successfully monitored by NIOSH to operate within the guidelines of their established PEL, a very important  feature in all of the Dust Director® Vacuums and Cyclones is the poured-in place urethane gasket.

While some vacuums use foam as a gasket, 90% of all vacuums use nothing!  This startling statistic includes vacuum's that cost well over $2000 dollars.  While the Rigid vacuum, for example, does not use any type of gasket (while leaking profusely), the consensus among morally conscience contractors is a Rigid vacuum is simply not designed to be used for silica dust containment.

 

 

Dust Director® vs. the Competition:

 

 
Bosch Vacuum.

Bosch

Fein Vacuum.

Fein

Hilti Vacuum.

Hilti

Ridgid Vacuum.

Rigid

On a visit to masonry tuck pointers in Chicago and Detroit, the suction power of the Dust Director® Vacuums was compared to the Bosch 3931 Airsweep, Hilti VC20 and Fein Turbo I vacuums.  Simply by placing our hand over the inlet port of  each vacuum, the following was the agreed upon results:

  • Dust Director® Model DD1000:  15% greater suction vs. Bosch & Fein, 25% greater suction vs. Hilti

  • Dust Director® Model DD1200:  Easily 20% greater suction than the DD1000

  • Both Dust Director® models where considerably lighter than Bosch, Fein and the Hilti vacuums.

 

 

 

 Join our email list!  Sign up and be the first to hear about Special Pricing, New Products, Demo Inventory and More!

Products manufactured and marketed by and for Dust Director® are protected by patents issued or pending in the United States and other countries.  Dust Director® is a registered US patent and trademark owned by Dustless, Inc., an independently owned and operated company;  all pictures, names and logos reserved.

15061 Route 30
N. Huntingdon, PA  15642
Ph:  412.824.6933
Fax:  412.824.4704

E-Mail ICS - With comments, product questions, etc.

ICS Company Logo. LITERATURE
FAX ORDER FORM
ICS / DUST DIRECTOR STORY
CONTACT US
TESTIMONIALS
CLEARANCE ITEMS
PRODUCT RETURN / WARRANTY POLICY
DUST CONTROL TOOLS
VACUUMS, FILTRATION
SLURRY / DEWATERING
FLOOR CARE
DIAMOND TOOLING
SEALANT REMOVAL