ICS Company Logo. Industrial Contractors Supplies
DUST CONTROL SYSTEMS
EQUIPMENT      TOOLING      KNOWLEDGE

Dust Director Logo.

20 Diamond Deal   Home of the 20 Diamond Deal   20 Diamond Deal

Call the Dust Director. 1-412-824-6933

Concrete & Masonry - Silica Dust & Slurry Control - Products & Solutions.

 

HOME

Product Brochures

Company Literature

Manuals

 

DUST CONTROL

Dust Guards, Saws

Blowers, Dust Socks

Grinders, Respirators, etc.

 

VACUUMS
&
CYCLONES

Silica Dust Extraction
Wet/Dry Models
Slurry & Sludge Extraction

ACCESSORIES
Replacement Filters, Hoses, Cuffs, Separators, etc.

 

SLURRY DeWATERING

Slurry, Sludge, Flood Reclamation - Relocation, Filtration, Disposal.

Slurry Press Machines

--  Polymers  --
Super Absorbent
SOLIDIFICATION

 

DIAMONDS
Blades, Cup Wheels
Surface Cleaning + Polishing
Coatings & Joint Sealant Removal

 

Clearance
Section

 

SEALANT REMOVAL
 Slice or Scrape
but don't grind ~

Joint Sealant
Coatings Removal
"Without Melting"

Carbide Drill Bits, Chisels, Scrapers Makita Power Tools
Drilling, Demolition, Saws, Dustless Drilling Attachments

Floor Machines --- Dust & Slurry Control
Why Use Larger & Heavier Machines?  Get Off Your Knees! 
Multi-Use Compact Portable Heavy-Duty

Abrasives & Wire Wheels

 

Floor Machines  >  Sealant / Coatings Removal  >  Hand-Held Scarifier, Cleaning, Edging Tool.
 

8" Scarifier, Cleaning & Edging Tool

 

The Power of Sandblasting in Your Hand!

 

Scarify or Clean Concrete, Steel, Iron, Asphalt

Remove Rust, Paint, Coatings, Sealers, etc. ~ Within a1/4" of the Wall.

 

120 Volt, 8" Heavy-Duty Scarifier.

8" M5-1 Scarifier

Purchase your selection and click the Buy Now button to add or save your item(s) to the Shopping Cart.  Once added, you can add or delete any items or change the quantities.

 

Optional Accessories -  < See Below >

 

$935.00      M5-1 Scarifier, complete with two (2) bundles of Harden Steel Cutters.  Expected cutter life on concrete, 20 - 30 hours;  on steel, 50 - 70 hours.

$1,176.00      M5-1C Scarifier, complete with two (2) bundles of Carbide Cutters.  Expected carbide cutter life on concrete is 5 times longer than the harden steel cutters.  While they can be used on steel they maybe a bit too aggressive.

 

Harden Steel or Carbide Teeth.CARBIDE or HARD STEEL CUTTER:
·  Replaceable cutter blades, for use on concrete, steel, iron and asphalt surfaces.

 

Specifications:  120 Volt, 6.9 Amp, 1/2 HP, 2000 rpm, 21 lbs., 8" wide scarifying path - removal rate of 70-100 sq. ft per hour, 2 teeth bundle (6 rows of teeth per bundle).

 

8" Heavy-Duty Scarifier.Fast, Effective, Portable - - -

A versatile, easy to use, heavy-duty tool for removing paint, rust, & adhesives from concrete, asphalt & steel.

Time, money and work saving tool that literally peels off almost any type of accumulation from any type of hard surface.

Compact, Heavy-Duty, Powerful, Portable - Versatile.  Used wherever iron, steel, brick or concrete needs to be prepped prior to painting or refinishing or where graffiti or unwanted paint needs to be removed.

 

 

Patented Harden Teeth Bites through Tough Accumulations on Hard Surface.

Harden Steel or Carbide Teeth.Decks, walls, ship hulls, tanks, pipelines, boilers, etc.
Results like sandblasting are yours from a small, lightweight tool.

Powerful, harden-steel teeth quickly peel off build-up.

Adjustable Depth Settings. Protects the underlying surface
& prevents overloading, stalling and excessive cutter wear. 

 

 

 

Scarify Concrete / Remove Coatings to 1/4" from a wall.A Tough-Guy Tool . . .

SANDBLASTING - Without the Sand . . .

EXTREMELY Heavy-Duty, Well Built 

The harden steel cutter will scarify anything over concrete, steel, iron or asphalt - including rubber and foam carpet backing, acrylics, hard urethanes & glue ~ to within 1/4" of the wall.  The M5-1 tools will not work on tar or soft adhesives.

The scarified concrete will be equivalent to a 4 or 5 Coarse Grit (which is impossible to achieve with any type of diamond or abrasive cup wheel).

 

 

Specialty, portable tool that is used in many applications.

Don't Just Scratch the Surface . . .

Scarifies Iron & Steel Surfaces - Great for Concrete Form Cleaning.A specialty tool that is practical in every industry that has maintenance work to be done:

 

 

  

Marine    Offshore    Flooring Contractors    Painting Contractors    Restoration Projects

  Swimming Pool Repair    Waterproofing Contractors    Traffic Line Removal

 

Paint removal from steel plate. Paint removal from block walls. Paint removal from pebbled steel grading. Rust removal from steel plate.
Common Applications:

Removal of Adhesive & Floor Finishes    Pool Prep for Resurfacing & Repainting    Graffiti Removal    Removal of Paint Lines    Quick Cleanup prior to Repainting    De-Watering of Damp Basements    Cleaning Tanks and other Large Metal Structures prior to Repainting    All types of Marine Applications from Oil Rigs to Barges    Cleans Concrete Forms    Fits in Hard-to-Reach Areas    New uses added everyday.

 

 

Replacement Cutters

 

Harden Steel & Carbide Cutters.Harden Steel Cutters (left cutter)
Expected cutter life on concrete:  20 - 30 hours,  steel:  50 - 70 hours.

#90M - Harden Steel Bundle Set, Price:  $119.00 
(2 bundles per set) 

#23M-4S - Individual Harden Steel Cutter, Price:  .54 Each 
(84 required per 2 bundle set) 

 

Carbide Steel Cutters (right cutter, above picture)
Expected carbide cutter life on concrete:  5 times longer than the harden steel cutters.  While they can be used on steel they maybe a bit too aggressive.

#90MC - Carbide Steel Bundle Set, Price:  $360.00 
(2 bundles per set) 

#23M-4C - Individual Carbide Cutter, Price:  $5.45 Each 
(42 required per 2 bundle set) 

 

 
 Join our email list!  Sign up and be the first to hear about Special Pricing, New Products, Demo Inventory and More!

Products manufactured and marketed by and for Dust Director® are protected by patents issued or pending in the United States and other countries.  Dust Director® is a registered US patent and trademark owned by Dustless, Inc., an independently owned and operated company;  all pictures, names and logos reserved.

15061 Route 30
N. Huntingdon, PA  15642
Ph:  412.824.6933
Fax:  412.824.4704

E-Mail ICS - With comments, product questions, etc.

ICS Company Logo. LITERATURE
FAX ORDER FORM
ICS / DUST DIRECTOR STORY
CONTACT US
TESTIMONIALS
CLEARANCE ITEMS
PRODUCT RETURN / WARRANTY POLICY
DUST CONTROL TOOLS
VACUUMS, FILTRATION
SLURRY / DEWATERING
FLOOR CARE
DIAMOND TOOLING
SEALANT REMOVAL